Buy Divegear Online!
[Double Pack] E/O Cord – Wet Connector 2 poles
€168,00 €130,00 incl. VAT
Save money with a double-pack and get 23% off!
2 pieces universal intermatable 2-pole wet connector E/O cord.
Commonly used to connect lighting systems to battery canisters by scuba divers. Also to connect your drysuit heating system with your external battery through your drysuit inflation valve. They are used by famous dive gear manufacturers like Halcyon, BTS, Light Monkey, Gralmarine or Santi.
Assembling hint:
To find the right diameter for your application measure the diameter of your old e/o cord (or normal cable, whatever is used). There is always a slight difference of +/- 0,5 mm which is not a problem at all and get adjusted by the rubber-seal inside the gland. Any connector will connect to any other, there is no female and male part. To build such systems you need two E/O cords. This is a pack of 2 pieces!
A leakage in your battery canister can be fatal, specially if using lithium batteries! So be sure that you know what you´re doing!! If you do not want to open your dive lamp, I can change the e/o connectors for you, with leakage warranty. Just send me a message.
Specifications:
- E/O Cord 9 mm
- Inline cable connector
- 2 Poles
- Cable length: 120 cm
- Diameter cable: ~9,6 mm
- Max voltage: 300V
- Max current: 20A
- Wet matable: Yes
- Depth rating: 300 meter (10,000 ft)
- EPDM cable
- Neoprene connector body
- Gold plated pin
- E/O Cord 5,5 mm
- Inline cable connector
- 2 Poles
- Cable length: 120 cm
- Diameter cable: ~5,8 mm
- Max voltage: 300V
- Max current: 10A
- Wet matable: Yes
- Depth rating: 300 meter (10,000 ft)
- EPDM cable
- Neoprene connector body
- Gold plated pins
| Weight | N/A |
|---|---|
| Dimensions | N/A |
| Cable diameter | 9 mm, 5,5 mm |
